Results 1 to 6 of 6
Hybrid View
-
03-12-2024, 09:21 AM #1
I went through the same thing. I've had my P1S for a month now and it's still blowing my mind. I printed some M4 threaded hex head bolts and the threads worked well. And that was with the .06 hotend. I tried printing an M3 bolt and the threads were kind of mushy but I bet if I were to print an M3 with the .02 head, they would work as well. So, think smaller than a dime for some things. I've completely stopped wondering if I made the right decision. The only thing that would shatter that is if it doesn't hold up to the test of time and hours. But I keep seeing posts of people talking of 1000s of hours without any problems. It will take me a long time to get to 1000s of hours as I'm not manufacturing, I'm just a guy who prints stuff for a client or myself on occasion. I couldn't be more thrilled with this printer.
Bambu P1S/AMS
NVision4D http://nvision4d.com
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help