Results 1 to 2 of 2
Threaded View
-
09-10-2023, 12:38 PM #2
- Join Date
- May 2018
- Posts
- 564
If I had to guess the nozzle is too close to the bad.. Starting Z offset need to be increased, however that is done on this particular printer I do not know. However, looks like the sides are ok, may be just a high spot in the bed..if the bed is 2 parts, make sure there is nothing suck between print surface and heater plate causing a high spot..
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials