Results 1 to 3 of 3
Thread: Model slicing problems
Hybrid View
-
08-30-2023, 01:07 PM #1
- Join Date
- May 2018
- Posts
- 578
your sensor need air flow.. you may want send that one back and grab this one.. When I wanted a sensor for my indoor hydroponics tent I considered an enclosure but opted for the simplicity of this sensor instead since it is ready to go as is.
https://www.adafruit.com/product/4099
ABS is my go to filament for most times, but that was after about 3 years of PLA and PETG.. and building a heated enclosure. Love the smell of ABS in the morning! ;-)Last edited by airscapes; 08-30-2023 at 01:16 PM.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials