Results 1 to 4 of 4
Hybrid View
-
05-26-2023, 02:01 PM #1
- Join Date
- May 2023
- Posts
- 5
Sence Qidi Provided no documentation on the I-Fast standard extruder. I don't know what to compare it to. I need to what the top temperature is so I know when to use the high temp extruder.
It just seems like this was a simple and important piece of info to leave out.
-
05-26-2023, 03:37 PM #2
- Join Date
- May 2020
- Posts
- 626
You can always email Qidi and ask them.
I very rarely print anything other than ASA and I know the standard extruder set up does not like sustained temps above 240 because the teflon tube starts to char and deform at the end, well mine did anyway.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion