Results 1 to 4 of 4
Hybrid View
-
05-26-2023, 02:01 PM #1
- Join Date
- May 2023
- Posts
- 5
Sence Qidi Provided no documentation on the I-Fast standard extruder. I don't know what to compare it to. I need to what the top temperature is so I know when to use the high temp extruder.
It just seems like this was a simple and important piece of info to leave out.
-
05-26-2023, 03:37 PM #2
- Join Date
- May 2020
- Posts
- 622
You can always email Qidi and ask them.
I very rarely print anything other than ASA and I know the standard extruder set up does not like sustained temps above 240 because the teflon tube starts to char and deform at the end, well mine did anyway.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials