Results 1 to 2 of 2
Thread: Roller Wheel Issue?
Threaded View
-
04-13-2023, 06:13 PM #2
- Join Date
- Jan 2023
- Posts
- 36
HIit should be pretty smooth if all things are going well. So clearly there is something going wrong. I would maybe try replacing the rollers if you think that is the issue. you could also try tightening the lead screw but other than that i am out of options. Hope this help good luck trying to find the solution
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion