Close



Results 1 to 4 of 4
  1. #1

    Help with boolean difference

    Hi,Im trying to use half of the attached meshes to make an imprint on a surface (like a chocolate box). I struggle to get it to work though. Have tried Boolean Difference inh Meshmixer and Blender, but does only pruduce non working results.Thanks for your help!Martin
    Attached Files Attached Files

  2. #2
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    878
    I selected the Queen component, then performed a plane cut and aligned the cutting plane to the monolith. On execution, I selected both components and performed Combine. The result is attached. There was one flag within Analysis>Inspector but selecting it for repair did not cause any apparent damage. Hope this helps.
    Attached Files Attached Files

  3. #3
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    878
    Okay, that was WRONG. You're asking for the difference and I did a combine. Sheesh. I'll get back on it in the morning.

  4. #4
    Staff Engineer
    Join Date
    Jun 2014
    Posts
    878
    Now that I'm awake, I used Fusion 360 to import both meshes, used Mesh/Modify/Combine and created the attached file. It passes Meshmixer's Inspector.

    Hope this is what you wanted. If not, let me know where the misunderstanding lies.
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •