X400 DIY Special offer kit (buildup)

[Luchador]

so not much news but i solved my picture issue

I closed the cabelings and connected the heater and thermistor of the hotend for testing the nozzle I´ll install after calibration of the extruder.

So plan for the day is to check all functions again ( I changed the pololu voltage a bit) and start calibration.

After installing the nozzle and maybe heat up the first time with Filament.

IMG_8201.jpgIMG_8205.jpg

br
thomas

[Luchador]

so a bit less time at the moment but I more and more on a good feeling to print on the weekend the first time
(if anyone has a great idea what to print first let me know)

at the moment still need to calibrate and also would like to readjust the Pololus again a bit, reason is simple Z and Y feels good after a wile moving around Motor still cold but X get already temperature so I´ll try to find a level without missing steps but cold as possible motors.
Finaly I´ll share "my" adjsutments (at the moment between 250 and 350mV)

best regards
Thomas