Results 1 to 3 of 3
Hybrid View
-
10-13-2022, 12:50 PM #1
- Join Date
- Sep 2022
- Posts
- 5
After a lot of read I found solution adding G92 X10.3 E0 and G92 Y-10.3 E0 to start g-code in Cura.
After a lot of read I found solution adding G92 X10.3 E0 and G92 Y-10.3 E0 to start g-code in Cura.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials