Layer shift and distortion in DLP print

[curious aardvark]

what print settings do you use for the 0.025 layers ?

[anvoice]

Bottom layer count: 3

Exposure: 3s

Bottom layer exposure: 60s

Waiting mode during printing: Light off delay

Light-off delay: 0

Bottom light-off delay: 0

Bottom lift distance: 10mm

Lifting distance: 5mm

Bottom lift speed: 25mm/min

Lifting speed: 25mm/min

Bottom retract speed: 80mm/min

Retract speed: 80mm/min

The settings are the same as for my 50 micron layers, except for that has a 5s exposure time and 120s bottom layer exposure time. The settings are as suggested for my resin by Chitubox (Sparkmaker FHD values).