Results 1 to 10 of 10
Hybrid View
-
08-24-2022, 05:48 AM #1
what print settings do you use for the 0.025 layers ?
-
08-24-2022, 10:55 AM #2
- Join Date
- Aug 2022
- Posts
- 8
Bottom layer count: 3
Exposure: 3s
Bottom layer exposure: 60s
Waiting mode during printing: Light off delay
Light-off delay: 0
Bottom light-off delay: 0
Bottom lift distance: 10mm
Lifting distance: 5mm
Bottom lift speed: 25mm/min
Lifting speed: 25mm/min
Bottom retract speed: 80mm/min
Retract speed: 80mm/min
The settings are the same as for my 50 micron layers, except for that has a 5s exposure time and 120s bottom layer exposure time. The settings are as suggested for my resin by Chitubox (Sparkmaker FHD values).
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help