Results 1 to 5 of 5
Thread: Plate not flat
Threaded View
-
07-25-2022, 08:26 AM #5
- Join Date
- Jul 2022
- Location
- 39.03,-104.66
- Posts
- 4
The first job would be to DEttach the heater. I haven't looked real close, but it seems to be really really attached.
Gawd ain't Amazon wonderful - took 14 seconds to find borosilicate glass for a Anet A8. And the A8 is the same as my tRONxy. I'm thinking a thin coat of heatsink compound between the aluminum & glass.
<a boy'n is toy>
PS yesterday my bag of 1000 tie wraps showed up and I spent an hour aligning wires - I'm CDO - mo-better and I can get to the sd card. Can't imagine where the mind(s) of the designer(s) were - some wireing is almost short and other wires are over a foot long. Thinking of attaching a spare RasPi.Last edited by liderbug; 07-25-2022 at 09:02 AM.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help