Results 1 to 10 of 12
Threaded View
-
08-17-2022, 03:50 PM #5
- Join Date
- Aug 2022
- Posts
- 8
So if everything else on the printer seems to work there's a very good chance that this chip is smoked:
ScreenShot 1276 Aug. 17 16.33.jpg
You can buy the chips on aliexpress for $3 or so, from digikey for $20 or so, but best fastest option is to buy a breakout board that uses this chip on amazon or ebay for maybe $10 and swap the chip.
This is pretty simple to do but you do need at least a good soldering iron. Good flux like chipquick really helps too.
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials