Results 1 to 10 of 54
Thread: My useless 3d printed trinkets
Threaded View
-
09-13-2022, 06:43 PM #11
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 148
I am still learning. There is something with my model and my machine settings that are not meshing. I have to either print hotter or slower based on my three failures.
I printed at 3 inches = failure. Re-printed at 3 inches = failure. Tried at 2.5 inches = failure. Tried at 2 inches and successful print. All the failures were nozzle jams which happened at around the same point of the print. Got better at clearing them out. lol.
I believe its due to my design with the current machine setting that is causing the failures.Last edited by OG56; 09-13-2022 at 06:56 PM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials