Results 1 to 5 of 5
Thread: bottom layers problem
Hybrid View
-
07-24-2022, 03:49 PM #1
- Join Date
- Jul 2022
- Location
- 39.03,-104.66
- Posts
- 4
I think I have a similar problem. I placed a straight edge across my plate an there was light under it at the center - A couple of thousandth. When I did the paper strip under the extruder at the center my 1st (2d, 3d) layer came out perfect. Of course the extruder scraped at the corners.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery