Results 1 to 3 of 3
Threaded View
-
04-23-2022, 10:25 AM #2
Starting out the extruder will not function if the temperature is below 170C.
The extruder will not extrude if Hot-End is clogged.
You can test with no filament heat the hotend to 180C using motion > Move Axis > Move Extruder you can watch the extruder wheel turn.
OR
You may have a broken extruder stepper motor cable.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials