Results 1 to 2 of 2
Thread: Part won't stick without a raft
Threaded View
-
05-06-2022, 06:41 AM #2
- Join Date
- Apr 2022
- Posts
- 2
I figured it out. I needed to re-calibrate the level of the platform. My guess is the nozzle was originally too far away from the platform to get good adhesion. Once I did the leveling (through the on-machine touch screen interface) parts now stick to the platform no problem.
I also re-cleaned the entire platform with rubbing alcohol just to be sure.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials