Originally Posted by
fred_dot_u
I'm not so sure about the PBM format, but you can use PrusaSlicer with an MSLA printer configuration to slice 0.050 mm layers, which are then output to a Prusa compatible file format. Once in that format, rename the extension to .ZIP, then extract the files within. I've done this with the slicer settings to 6.35 mm. I was surprised the slicer accepted such a layer thickness, but the results were then ready for cardboard cutting on a laser. The files are .PNG bitmaps, which appear to meet your requirements.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials