The creality slicer 4.8.2 slicer is one of the oldest slicers out.

In fact it is Cura 15.04.6 shown in the image below.

Cura 15.04.jpg

I have Cura 15.04.6 and on occasion still use Cura 15.04.6 though it is really old. I mainly use PrusaSlicer which is Slic3r with some really excellent upgrades or newer versions of Cura.

Where I have several profiles configured from my original Cura added to all newer Slicers and they have proved to work great for my current needs.