Results 1 to 1 of 1
Thread: "cheapest" rigid vertical wall?
-
12-13-2021, 12:15 PM #1
- Join Date
- Dec 2021
- Posts
- 1
"cheapest" rigid vertical wall?
Hello,
I am making a test model to measure and correct printer skew.
This one works for me fine, but I wonder if there is a good way to improve it making faster to print.
These are two 4mm thick walls; but even with min infill and single-layered it takes 2+ hr to print.
The purpose is to make a rigid vertical square for further measurements and its only requirement is to be rigid enough to be printed straight with no degradation during print.
Any ideas welcome.
TIA
skew-detect-v1.jpg
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials