Close



Results 1 to 3 of 3
  1. #1

    Question 50% Fail/Trouble shooting

    Hi,

    I'm running an Anycubic Photon Mono with Anycubic 405nm Translucent green Resin
    Build Plate has been leveled several times since problems began

    I've been using this Printer/Resin/Settings for about 4 months now with little to no issues at all. this recent file however is causing me some problems, i'm getting about 50% fail printing these skulls https://www.myminifactory.com/object...-basing-133477


    -build plate is leveled
    -room temp= Normal
    -Exposure/machine settings as follows







    I get about 50% success, and 50% failure on the presupported files.
    I've tried printing at %115 scale and that seemed to help a little bit, but not much.
    I've also dropped the normal exposure to 1.75s aswell as raised it to 2.25s neither of which seemed to change anything.

    If I've left any information out let me know--First post.

    Thanks for any suggestions or help.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    pictures of the failures please.
    I'm not paying £3 for something i don't want, just to look at the stls.
    He does say this is the first release of the models. So it's most likely an issue with the file.

    'basing skull pack'
    basing ????

  3. #3
    Picture of fail was in the first post. half of them didnt print past the first contact at a support, mostly the ones on the outside.Okay thanks.
    Attached Images Attached Images

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •