Results 1 to 3 of 3
Hybrid View
-
11-21-2021, 11:29 AM #1
what are you printing with ?
speeds, temps etc.
It could simply be you need to adjust the z-axis offset to get the nozzle closer to the bed.
or print slower, or hotter etc.
-
11-21-2021, 08:26 PM #2
- Join Date
- Nov 2021
- Posts
- 2
im printing with PLA and my temp is 210, bed is 60. I have a pei sheet that is a known working bed from my other printer, I have adjusted the offset slowly and even when it is closer than ideal it doenst stay stuck. I had success printing much slower but it wasnt consistent success. I use a 14 perimeter brim as well
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials