Results 1 to 10 of 15
Threaded View
-
10-10-2021, 07:41 AM #11
to make a mould watertight - you need to print it solid. Now with most slicers 100% infill is NOT solid. usually you need to tick a box in the slicer that adds a solid diaphragm and set it to make one every layer. That will then make a totally solid, utterly watertight print that should work fine for a resin mould. Obviously you still need to get the printing temp and speed right as well. But you can certainly make watertight moulds.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials