Results 1 to 10 of 11
Thread: Newby looking for Ender 5 help
Threaded View
-
08-29-2021, 10:52 AM #11
- Join Date
- Aug 2021
- Location
- South Lincolnshire
- Posts
- 6
Thanks for offering to help.I think this is version # - #define CONFIGURATION_H_VERSION 02000901And - define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.#define INVERT_X_DIR false#define INVERT_Y_DIR false#define INVERT_Z_DIR false// Direction of endstops when homing; 1=MAX, -1=MIN// :[-1,1]#define X_HOME_DIR 1#define Y_HOME_DIR 1#define Z_HOME_DIR -1//#define I_HOME_DIR -1//#define J_HOME_DIR -1//#define K_HOME_DIR -1I can also find a way to send you a copy of my actual configuration.h and my configuration_adv.h if that would help.Gordon
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials