Show your MODS

[usarmyaircav]

robh2, yes I used the adhesive to hold the PEI to the glass and clip the whole thing down. to the heat bed. The main guy on that thread even if he wanted to, flip the glass over and print on the glass with the PEI down on the heat bed, for other materials.

[adamfilip]

I typically print onto 6mm Borsilicate glass. but i also have a pieces of 3mm glass that I can use to support under teh PEI
hold it down with Binder Clips.

[beerdart]

I got my sheet here.http://www.mcmaster.com/#8685k41/=vrmwjq

Then glued it to a piece of .125" acrlyc with weldwood contact cement.

[beerdart]

They also have thicker if you dont want to glue/tape it down. http://www.mcmaster.com/#catalog/121/3649/=vrn0h2

[RobH2]

Good info. I'll try some.

[misquamacus]

I know it isn't exactly a printer mod per se, but Gmay3 suggested I post my Folding Spool here:
http://www.thingiverse.com/thing:671449

It works great for sample/specialty filament coils!

[drizz46]

I've had my i3v 10" for about 3 months now and have been reading the forums for a while. I finally got around to making and documenting something for my printer! I've used other spool holders that I downloaded but they always broke, so I finally made my own. I think it works works pretty well and looks cool too. I modeled it after the Eiffel Tower..

http://www.youmagine.com/designs/eif...ool-holder-i3v

I'd love to hear your guys opinions!

[pichuete]

Y Belt Holder

hi guys i willshare my Design for a Y belt holder upgrade that i did. i didnt like the way how the y belt is attached to the bed with zip ties so i decided to make this . i found is a more secure and easy way to align the Y belt .

If anyone is interested . i already upload it to thingiverse
http://www.thingiverse.com/thing:702152

[pgx3s]

Hi all

That is my first post here.

I finished my 12" last week. At the moment I am still adjusting und configuring it.

For my first mod I made a frame for the lcd screen. More look than usefullness.

http://www.thingiverse.com/thing:718725



BR
PGX3S

[sniffle]

Hi all

That is my first post here.

I finished my 12" last week. At the moment I am still adjusting und configuring it.

For my first mod I made a frame for the lcd screen. More look than usefullness.

http://www.thingiverse.com/thing:718725



BR
PGX3S

very nice!, I have soem mods to show off in the near future but can't yet :-)