Results 1 to 4 of 4
Hybrid View
-
08-18-2021, 11:17 AM #1
- Join Date
- Jul 2020
- Posts
- 14
OK the solution was as simple as it was dumb. All metal hotends apperantly need very small retractions (ca. 3mm instead of my ususal 6). I actually thought of retraction before but i did not think to lower it THAT much. Thanks for the tip with the different thermistor types anyways. I will correct that as well
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion