Results 1 to 10 of 16
Thread: How do I draw this in 3d?
Threaded View
-
08-27-2021, 07:08 AM #7
- Join Date
- Aug 2021
- Posts
- 6
I think I read it wrong and your wanting the sleeve to go over the nozzle then use a knife. You have to mind and use material thickness so your inside of your sleeve will be the outside of the nozzle. I see your tip has 14mm diameter at the top. if you have a 1mm wall then it will obviously be 12mm inside that then gets cut. Send me the dimensions that you want the finished nozzle to be.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help