Results 11 to 15 of 15
Thread: The Story of my NEO
Hybrid View
-
08-20-2014, 10:25 PM #1
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
Hi Evgeny
The Filament from GRRF have this issue ? that sounds not good, please contract the support bec of this Filament 2.2mm never seen this ( cant check at the moment bec not in munich ) 2.2 should be on the Limit the nozzle is a bit bigger but 2.2 could be too much and also the bowden will produce much mord force with 2.2mm.
about the fan thanks for information i'll put forrward this information to GRRF that they can check how this can happen.
About the fan good, with the connector on the printboard you can control it with the slicer
Best regards
Thomas
-
11-30-2014, 08:12 AM #2
Very interesting read guys, how are you making out with your NEO printers now? Such a good looking little machine.
-
12-01-2014, 06:17 AM #3
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
Hi
Im still happy with him he is now my printer for all parts who are fit into the NEO (why should I start the bigger ones) he is printing and peinting and printing..
the lat few weeks a friend take care of him ( I was a few weeks not in Germany) now he already called me if I need him soon back or if he can hold him longer *g* looks like he is infected and there will be soon his own printer in the house.
I already prepared a few next plans with him I working on a Heatbed and a standalone system, the LCD with SD card is already here but I didnt want to change my printrboard so I waiting for one with a defect connector if I can repair it I will use this one for experimental if all working i can work with the NEO standalone can print from SD card with an LCD and a Heatbed. But still on the begnning erliest start for test is when I get the second printrboard.
br
Thomas
-
12-16-2014, 12:08 AM #4
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
@ Ravikaleova
What have the camera to do with 3D Printing and specialy with efrost´s problems ??
br
Thomas
-
01-11-2015, 11:22 PM #5
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
Think it was a 40mm,
12V
I would connect it with the printport there is a connector for a fan , he can controlled by the slicer.
Br
Thomas
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials