Results 1 to 10 of 11
Hybrid View
-
06-25-2021, 02:00 PM #1
so it's almost an ender 3 clone with a really weirdly placed filament sensor.
surely that should be logically between the reel and the extruder.
That's got to cause issues with the bowden tube when you're printing on the far left of the bed.
Not to mention why use a bowden tube at all, on a printer with dual z-axis motors ?
The dual motors are in their favour.
But still got a narrow bed guide using wheels.
Still, if they'd given me one - I'd say it was brilliant too :-)
That said - it would appear you probably work for anycubic, as the youtube channel has just that printer on it. And seems to be have been setup specifically to review it.
Now that's just cheap - come on guys, send me one !
Still it is an improvement on an ender 3.Last edited by curious aardvark; 06-25-2021 at 02:22 PM.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials