Results 1 to 1 of 1
Thread: Infill Not Printing Well
-
06-20-2021, 08:55 PM #1
- Join Date
- May 2021
- Posts
- 19
Infill Not Printing Well
On some things I am getting a really good infill and prints, but on other things I randomly pull from ThingiVerse or elsewhere that doesn't have any specific setting changes I've had some issues with.
This is a simply circle, with some lines on the top layer but the infill is coming out nasty.
IMG_2254.jpg
Printer: Qidi X-Pro
Slicer: Simplify3D
Layer Height: 0.1000 (Trying for a super-clean finished product) (Is this too low, I assumed any setting is 100% fine, it merely determines the quality)
Infill: 15% - Rectilinear (Internal + External)
Infill Overlap: 20
Infill Extrusion Width: 125
Min. Infill Length: 5.00
Combine Infill Every: 1 Layer
Bed Temp: 75
Extruder Temp: 240 (PETG)
Cooling: 0 for first, 100 after 1
Speed: 60
Swapping to 20% infill and Full Honeycomb to test out real quick.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help