Close



Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Technician Axl_Myk's Avatar
    Join Date
    Nov 2020
    Location
    The Hartland of Michigan
    Posts
    73

    Cleaning the bed

    Besides alcohol, being in short supply, what's good to use for cleaning the bed.
    I have an Ender 3pro. I have acetone but I understand that will melt the bed.

  2. #2
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,073
    Add Roberts_Clif on Thingiverse
    Cheapest possible window cleaner you can get. That way there is not other chemicals that could render cleaning useless.

  3. #3
    Technician Axl_Myk's Avatar
    Join Date
    Nov 2020
    Location
    The Hartland of Michigan
    Posts
    73
    We have Dawn, which is what we use for most things. A little white vinegar. I'll give that a try. It works on astronomy equipment and windows, so it should be ok.
    I'll report back.
    TNX

  4. #4
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,073
    Add Roberts_Clif on Thingiverse
    I was just looking Walmart online store has some and the price is not too bad!

    Isopropyl.jpg
    Last edited by Roberts_Clif; 01-23-2021 at 09:43 AM.

  5. #5
    I think that window cleaner from Walmart would be decent enough for fast cleaning. But I would recommend professional and complex cleaning of your apartment. Something like this or any local cleaning service and see what you'll get. I would recommend hiring a cleaner once a month.

  6. #6
    Technician Axl_Myk's Avatar
    Join Date
    Nov 2020
    Location
    The Hartland of Michigan
    Posts
    73
    I have a cleaner. My Wife.
    This isn't a business environment.

    I tried the Distilled water, vinegar, Dawn mix. Then rinsed with distilled water.
    I ended up putting my new surface on. I'll try again.

  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,505
    what is the surface ?
    And what kind of dirt do you have ?

    I find that mostly I just wipe the dust off :-) And occasionally leaves that blow through the windows facing the printers.

    For everything else a quick wipe with a sheet of kitchen paper dampened with acetone is all I've ever used.
    Given how fast it evaporates and how little you need - it's just not there long enough to damage even a susceptible print surface.

    Not sure how a print bed can get really greasy or dirty ?
    What are you guys doing to them ?

  8. #8
    Engineer-in-Training
    Join Date
    Aug 2020
    Location
    United Kingdom
    Posts
    201
    The only time I use anything other than a quick wipe with Acetone is on surfaces which I have used glue stick which when they get scruffy I put a drop of washing up liquide on the surface and wash off under a tap with water, dry, then wipe over with IsoPropyl Alcohol

  9. #9
    Student Raissa's Avatar
    Join Date
    Jan 2021
    Location
    Paris
    Posts
    24
    Ask the consultants in the store what means will not spoil the sofa

  10. #10
    Technician Axl_Myk's Avatar
    Join Date
    Nov 2020
    Location
    The Hartland of Michigan
    Posts
    73
    Umm, ok.
    I've settled on a quick wipe with a towel lightly dampened with Acetone.
    It also helps to keep your fingers off the bed. Skin oils can affect bonding to the bed.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •