Results 1 to 10 of 49
Threaded View
-
06-25-2021, 06:28 PM #29
- Join Date
- Apr 2021
- Posts
- 186
Yeah, there is.
There should be an option in the menus, usually under "motion" or something similar, which homes all axes.
The Gcode for that is G28.
Be careful when you run that command. Make sure your Z-axis sensor/limit switches are working or it won't know when to stop.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion