Close



Results 1 to 3 of 3
  1. #1

    Programming Bed Temp into GCODE

    I have a Monoprice Maker Select v2, and the default for the bed temp is 30 C. I always have to reprogram it to 50 C every print after the print start, and AFAIK there is no way of programming the default to 50 C.

    I use CURA and I don't see a bed temperature setting in the file settings or profile.

    Is there a way to set the bed temp within the GCODE, and if so, what is the line I need to put into the GCODE file?

  2. #2
    Technologist
    Join Date
    Apr 2021
    Posts
    138
    It’s definitely in the cura settings. You may have to tell cura your printer has a heated bed before they are visible.

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,505
    Um, yeah - pretty standard setting in ALL slicers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •