Results 1 to 2 of 2
Hybrid View
-
04-20-2021, 06:59 AM #1
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
You have zero of very low adhesion to the print bed. Try setting the print head closer to the bed about 0.1 mm or 3 thou (0.003") And / Or use a bed adhesive like a thin layer of PVA glue stick Elmer or Prit depending on which side of the pond you are.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials