Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Hybrid View
-
03-15-2014, 04:43 AM #1
- Join Date
- Feb 2014
- Posts
- 14
You may want to remove the nozzle (careful! You need to hold the heater still with one wrench as you remove the nozzle or you can twist the temperature sensor wires & break them!) - I had some plastic restricting the small plastic tube that runs through the extruder. Once I cleaned that it prints well with PLA.
dave
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials