Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Hybrid View
-
01-19-2017, 01:51 PM #1
- Join Date
- Feb 2015
- Posts
- 91
Well... I haven't tried it myself, but glue stick apparent works both to stick your print down as well as help you release it at the end. Plus, it cleans up with water, so you can use some water on the edges to get it to release.
Another thing to try is to put the bed and print in the freezer for a while that can help it pop loose.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion