Results 1 to 10 of 21
Thread: I'm ready to upgrade
Threaded View
-
04-26-2021, 06:51 AM #19
there is absolutely no reason you shouldn't run 100mm.s as a 'normal' print speed.
But with the rails and setup on that machine you should be able to run a functional print at 150mm/s no problem.
So try something simple and ramp the speed up - pretty sure you'll be pleasantly surprised at just how fast it will print.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials