Results 1 to 10 of 12
Threaded View
-
03-18-2021, 11:28 AM #8
- Join Date
- Jun 2014
- Posts
- 887
I didn't look at the nozzle temps in the g-code and I didn't examine it to every single entry. The "directives" in the g-code aren't telling the machine to move outward for the bulge. Even a change in the extrusion speed isn't something I examined, but could be a factor. With all these "not examined" factors, a test using PrusaSlicer sounds like a better idea.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials