Results 1 to 4 of 4
Thread: Homing Failed/Noob
Hybrid View
-
03-14-2021, 06:09 AM #1
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
You have the nozzle way too HIGH and probable not quite level hence printing one side. Use a piece of 80 copier paper as a thickness gauge. Have you checked your bed with a straight edge as suggested by Axl-myk it's a much easier way to check flatness than technology your problem could be a bent gantry or print bed rail.
Last edited by Gambo; 03-14-2021 at 06:17 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion