Blobby Prints since changing nozzle

[curious aardvark]

it's partially blocked.
OR the feed tube is not going all the way to the top of the nozzle.

You need to remove the new nozzle and make sure that the ptfe tube (or metal tube) is still pushed all the way to the top of the new nozzle.

When taking these things apart it's really easy to move the feedtube.

[Torby]

it's partially blocked.
OR the feed tube is not going all the way to the top of the nozzle.

You need to remove the new nozzle and make sure that the ptfe tube (or metal tube) is still pushed all the way to the top of the new nozzle.

When taking these things apart it's really easy to move the feedtube.

Hmm. If the tube was not out of whack before, it is now!71.gif