Results 1 to 10 of 13
Thread: Adhesion problems CR10S Pro V2
Threaded View
-
02-15-2021, 10:33 AM #6
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
with an ender 3 I set the nozzle above the bed at 3 thousandth of an inch or 0.075mm max 2thou 0.05mm minimum height so I think you are 2 to 3 times too high
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help