Results 11 to 12 of 12
Hybrid View
-
12-05-2021, 02:31 AM #1
- Join Date
- Dec 2021
- Posts
- 1
So back to the 2 selections.....
The .3mf option is what you want to save as. I did it and the xyz slicing software reads it. I was then able to slice, or press the prepare button and now I'm printing on my jr 1.0 using creality software. I also downloaded the zip file and opened the Dav_VanciI_1.0_AIO ini file in the open profile in the file tab.
-
02-06-2021, 08:50 PM #2
OK, try this. Install Cura slicer https://ultimaker.com/software/ultimaker-cura
Now, go to stlfinder,com and look around. Use Cura to convert .stl files into gcode for the printer.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials