Results 1 to 2 of 2
Hybrid View
-
01-16-2021, 09:33 AM #1
- Join Date
- Jan 2021
- Posts
- 2
Prinitng spokes using Creality LD002r printer
Hi
I am new at this, and hope someone can please advise. I am a hobbyist (dioramas), and do not design 3D models.
I have Creality LD002R printer and havebeen able to print some stuff. (yes, including the Eiffel tower ;-))
When I try to print something that has spokes, they do not print. I have tried this is 1/35 scale, and also in 1/24th scale.
I use the default settings which are:
- Layer Height : 0.05mm
- Bottom Layer count: 10
- Exposure time : 9s
- Bottom exposure time: 50s
- Light-off delay: 0s
- Bottom light off delay: 0s
- Bottom lift distance: 5mm
- Lifting distance: 5mm
- Bottom lift speed: 65mm/min
- Lifting speed: 65mm/min
- Retract speed: 150mm/min.
Further to this, I have tried supporting and without supports.
Please help?
Thanks
Richard
-
01-16-2021, 10:47 PM #2
- Join Date
- Jan 2021
- Posts
- 2
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery