Flashforge Adventurer 3 lite issue

[curious aardvark]

that is ABS

pla would say:180- 210c and 50c - I mean bed temp for pla should always be 65c. But manufacturers rarely get it right ;-)

But if the roll says that - it's abs. or possibly pet-g, but definitely not pla.
Either that or they just put the wrong settings on the label.

[Streetsnake]

that is ABS

pla would say:180- 210c and 50c - I mean bed temp for pla should always be 65c. But manufacturers rarely get it right ;-)

But if the roll says that - it's abs. or possibly pet-g, but definitely not pla.
Either that or they just put the wrong settings on the label.

So this is what I've ordered...in various colors: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It's weird...the description says 190-220 but the box it came in says 220-240 with bed at 100. When we opened the FF up, we put in one of the rolls we purchased and used the factory settings to print a sample file. The platform kept getting detached from the bed shortly after starting. I think the bed was 50 and the temp was 215.