Results 1 to 8 of 8
Thread: Prints coming out 'shifted'
Threaded View
-
07-25-2014, 04:57 AM #8
- Join Date
- Jul 2014
- Posts
- 14
Hi all
I found the problem. It was the small allen bolts in the pulley mount on the right-side for the x-axis. The bolts were extremely loose. I tightened these bolts (and the other pulley bolts) and everything works fine now.
right side of X.jpg
Thanks for all the help!
-Tony
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help