Prints coming out 'shifted'

[roguesqd]

Hi all,

I have a flashforge creator x and my prints have started coming out 'shifted'

Any ideas what could cause this? (see attached pics)

Running ABS...single right extruder (never used the second one) with temps of 220. Build plate set at 104. Running .2mm prints with 60ms feed and a 100ms travel. Just changed out kaplon tape and re-leveled build plate with no luck.

Could it be the second extruder dragging along the print and offsetting it? I live in Orlando, FL USA...and it has been an extremely humid summer (could the humidity cause this?).

Thanks all,

-Tony