Results 1 to 10 of 13
Thread: Help needed: layer shifting
Hybrid View
-
12-01-2020, 04:47 PM #1
- Join Date
- Nov 2020
- Posts
- 6
I really wish that made it clearer. I understand what you mean by binding, I'm just not sure what it pertains to on my printer specifically:
https://drive.google.com/file/d/1Cpg...ew?usp=sharing
Can you identify in this image what binding is? Or is it something on the printer head itself?
Thank you for your patience with me.
-
12-01-2020, 05:42 PM #2
Measure the distance between the smooth rods at 3 locations MIN, Center and MAX on the X-Axis to See where they are not parallel.
Larger or Smaller gap between the smooth rods.
-
12-02-2020, 10:02 AM #3
- Join Date
- Nov 2020
- Posts
- 6
-
12-03-2020, 06:18 AM #4
Then I proposse another way to get your 3D Printer working.
Great Bearing Cleaning video
https://www.youtube.com/watch?v=KQHugGSQd5M
-
12-03-2020, 01:34 PM #5
- Join Date
- Nov 2020
- Posts
- 6
Aha ok I'm not surprised by this suggestion. Something I forgot to mention is that the bearings also make various horrible sounds whenever the printer moves left of the midway point along the x axis. You could very well be onto something here. I'll have to get one of these ultrasonic cleaner things though. Will any work? they seem to vary in price quite a bit.Ughhh not looking forward to removing the bearings again, its a big job.... but needs must.
-
12-03-2020, 03:33 PM #6
-
12-03-2020, 04:05 PM #7
- Join Date
- Nov 2020
- Posts
- 6
So I don't need an ultrasonic cleaner?
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials