Results 1 to 10 of 13
Thread: Help needed: layer shifting
Hybrid View
-
12-03-2020, 06:18 AM #1
Then I proposse another way to get your 3D Printer working.
Great Bearing Cleaning video
https://www.youtube.com/watch?v=KQHugGSQd5M
-
12-03-2020, 01:34 PM #2
- Join Date
- Nov 2020
- Posts
- 6
Aha ok I'm not surprised by this suggestion. Something I forgot to mention is that the bearings also make various horrible sounds whenever the printer moves left of the midway point along the x axis. You could very well be onto something here. I'll have to get one of these ultrasonic cleaner things though. Will any work? they seem to vary in price quite a bit.Ughhh not looking forward to removing the bearings again, its a big job.... but needs must.
-
12-03-2020, 03:33 PM #3
-
12-03-2020, 04:05 PM #4
- Join Date
- Nov 2020
- Posts
- 6
So I don't need an ultrasonic cleaner?
-
12-03-2020, 06:24 PM #5
No!!!
Though they are quite handy on some occasions it is a purchase that is required.
You can use a splashing motion or fill a Spray bottle and get the bearing clean.
I 3D Print Fidget Spinners for Halloween every year and use roller skate bearings.
These bearings are packed with grease and fidgets spin faster with no grease.Last edited by Roberts_Clif; 12-03-2020 at 07:18 PM.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials