Results 1 to 10 of 23
Thread: Real World 3D Printer Comparison
Hybrid View
-
11-26-2020, 05:52 AM #1
so what do you think was wrong with your first cube ?
Looks pretty clean to me
Also what size did you print it at ?
I'll have go at one of these - but I really HATE printing stuff that has no actual use. After 6 years and 6 printers, I've got more useless bits of plastic around than I know what to do with.
I nominate a 50mm 4 leaf iris box.
Bastards to print and really useful as well as great giveaways that don't use too much plastic.
But I am curious to see what the lattice cube comes out like.
I'll test the delta and the sapphire.
the knp and the mini delta are both pretty slow and the i3 is still awaiting major transplane surgery :-)
-
11-26-2020, 06:53 AM #2
They say the camera takes off lbs well the camera took off the rough rough edges.
Though being somewhat of a perfectionist it did have a lot to be desired.. .
I printed it at Scale 100%
Image2.jpg
I have the final estimated print time 2 hours 9 minutes
Cube FInal.jpg
Will post the final 3MF file for all who have Prusaslicer 2.3.0 alpha 4 to examine.
I find that Prusa slicer has so much to be Thankful for that may never need another slicer again.Last edited by Roberts_Clif; 11-26-2020 at 07:14 AM.
-
11-30-2020, 03:32 PM #3
This truly was a fun project.
finally killed my Heat Brake {Throat} and Nozzle after two years of use.
Nozzle & Heat Break.jpg
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials