Results 1 to 10 of 23
Thread: Real World 3D Printer Comparison
Hybrid View
-
11-23-2020, 10:43 AM #1
Here is a 1st Print - Have never tried this before and will print again as Cura 3.6.0 did this model no justice.
Layer .24
Print speed variable throughout the Model
No Supports
Photo taken at 2 hours 39 minutes]
Final Time was 2 hours 52 minutes.
2-39 Here.jpg
Final.jpg
Almost embarrassed to show this Print
Will change slicer an make changes to the slicer profile post again.Last edited by Roberts_Clif; 11-23-2020 at 10:57 AM.
-
11-23-2020, 09:40 PM #2
3rd Print 2 hours 28 minutes and I found some tricks, believe I can cut this time down to about 2 hours.
2 Hours 28 Minutes.jpg
Will Post all Prusaslicer profiles after the Last print.
Now this is more like the model I wanted to Print.
Same settings just on a better Slicer.
2 Hours 21 Minutes.jpg
Shaved 7 minutes off the Print2 hours 21 minutes maybe could save another 7 minutes.
I think 2 hours 28 minutes is about the limit.
Show me your Print.Last edited by Roberts_Clif; 11-24-2020 at 12:00 PM.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials